HD84546BX Redline 5 on 4.5in Hub & Drum Kit For 3.5K Axles

Redline 10" x 2-1/4" Hub & Drum W/ 5 on 4.5" Bolt Pattern For 3,500lb Axles

Redline hub & drum kits come with some of your main components like the inner and outer bearings.  With Redline kits there is no need to worry about the races as they are already pressed into the hub for you.  You will also get the grease seal, grease cap, and wheel nuts for the hub.  This hub & drum is designed for use with a #84  spindle. Each hub has a 1,750 lb capacity.  Spindle nut and spindle washer sold separately.

Items in Kit:

• 1 L68149 Inner Bearing (1.378" ID)
• 1 L44649 Outer Bearing (1.063" ID)
• 1 L44610 Outer Race (Already Pressed In) 1.98" OD
• 1 L68111 Inner Race (Already Pressed In) 2.361" OD
• 1 10-19 Grease Seal (1.719" x 2.565")
• 1 46749 Grease Cap (1.986" OD)
• 1 21-41-1 Grease Cap (1.986" OD)
• 1 85-1 Grease Cap Plug
• 5 X1023R Coned Wheel Nuts
• 1 5 on 4.5" Hub & Drum Pregreased For Convenience
• 1,750lb Capacity Per Hub
• Use with a 10" x 2-1/4" brake

To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.